Brochures

2 Wago Signal Splitter (2)

Categories
Published
of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
signal splitter
Transcript
  857-423 3 206  JUMPFLEX  ®  Transducers Signal splitter with 2 configurable current outputs OUT 1INPOWER5612347 8OUT 1+GND 2Us+GND 3 IN+GND 1OUT 2+GND 4OUT 2 <_________ 94 mm/3.68 in  _________> 6 mm/0.23 in    <  _  _  _  _  _  _  _  _  _    9   6  m  m   /   3 .   7   6   i  n   _  _  _  _  _  _  _  _  _   >  ____________  _>      _           > Short description: The 857-423 Signal Splitter is used to convert, amplify, filter and electrically iso-late analog standard signals. The device has a 3-way isolation with a 2.5kV test voltage. The signal splitter transmits the configurable input signal (0 - 10V,2 - 10V, 0 - 20mA, 4 - 20mA, 0 - 5V or 1 - 5V) in two analog current outputs that can be set independently of one another between 0 - 20mA and 4 - 20mA. Measurement range switching is calibrated.The device is supplied with 24VDC, which can be commoned using lateral push-in type jumper bars in a quick and cost effective way.A green LED on the front panel indicates normal operation. The signal splitter meets the requirements for safe isolation of input, output and supply circuits with 2.5kV test voltage according to EN 61140. Description Item No.Pack. UnitSignal splitter with 2 configurable current outputs857-423 1 Accessories General accessories see pages 222 - 223 Approvals Shipbuilding  g  (pending) 4   r  ANSI/ISA 12.12.01Class I, Div. 2, Grp. ABCD, T4Conformity marking  1 General Specifications Dimensions (mm) W x H x L6 x 96 x 94Height from upper-edge of DIN 35 railWire connectionCAGE CLAMP ® SCross sectionssolid: 0.08 mm² ... 2.5 mm² / AWG 28 ... 12fine-stranded: 0.34 mm² ... 2.5 mm² / AWG 22 ... 12Stripped lengths9 ... 10 mm / 0.37 in Technical Data ConfigurationDIP switch Input signal0 ... 20 mA, 4 ... 20 mA, 0... 5 V, 0 ... 10 V, 2 ... 10 V, 1 ... 5 V (calibrated switchable)Input resistance    50 Ω (In = mA)   100 kΩ (In = V)Output signal2 x 0(4) ... 20 mA (calibrated switchable)Load impedance2 x 300 ΩMax. operating frequency100 Hz / 1 kHz (switchable via DIP switch)Response time (T 10-90 )< 3.5 ms / < 300 µsVoltage supply V N 24 V DC Supply voltage range16.8 V ... 31.2 VCurrent input at 24 V DC< 35 mATransmission error< 0.1 % of the full scale valueTemperature coefficient0.01 % /KTest voltage (input/output/supply)2.5 kV AC, 50 Hz, 1 minAmbient operating temperature-25 °C ... +70 °CStorage temperature-40 °C ... +85 °C WAGO Kontakttechnik GmbH & Co. KG Subject to design changes 22.04.2010    Postfach 2880 - D-32385 Minden Hansastr. 27 - D-32423 MindenPhone: +49(0)571/887-0 E-Mail: info@wago.comFax: +49(0)571/887-169 www.wago.com  3 DIP Switch Adjustability ▯ = ON DIP Switch S1 (6-fold)Input SignalMax. Operating FrequencyOutput 1Output 2 123456▯0 … 20 mAf max. approx. 1 kHz0 … 20 mA0 … 20 mA▯▯4 … 20 mA▯f max. < 100 Hz▯4 … 20 mA▯4 … 20 mA▯0 … 10 V▯▯2 … 10 V0 … 5 V▯1 … 5 V Default Settings  - Input: 0 ... 20 mA - Output 1: 0 … 20 mA - Output 2: 0 … 20 mA - Max. Operating Frequency: < 100 Hz 857-423 WAGO Kontakttechnik GmbH & Co. KG Subject to design changes 22.04.2010 Postfach 2880 - D-32385 Minden Hansastr. 27 - D-32423 MindenPhone: +49(0)571/887-0 E-Mail: info@wago.comFax: +49(0)571/887-169 www.wago.com

PSR900

Jul 23, 2017
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks