Documents

B131203_HA-821 Datasheet_CD1_ver1.0.pdf

Categories
Published
of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
Create affordable and seamless path to high performance Ethernet WAN and wireless 4G mobile backhaul services The HFR HA-821 is cost effective, multiservice, carrier-grade ETSI 300 rack mount complaint unit designed to provide Backhaul L2 switching capabilities in 10G Ethernet Metro Core rings. In small form factor and low power architecture the unit is ready to be installed in customer premises to solve space and power challenges, deliver high performance scalable services and reduce op
Transcript
  Create affordable and seamless path to high performance Ethernet WAN and wireless 4G mobile backhaul services The HFR HA-821 is cost effective, multiservice, carrier-grade ETSI 300 rack mount complaint unit designed to provide Backhaul L2 switching capabilities in 10G Ethernet Metro Core rings. In small form factor and low power architecture the unit is ready to be installed in customer premises to solve space and power challenges, deliver high performance scalable services and reduce operational costs. Standards-Based Multiservice Delivery Designed to support Metro Ethernet Forum industry standards, HA-821 delivers Ethernet Private Line, Ethernet Virtual Private Line , Ethernet LAN,Ethernet Access and Ethernet tree based connectivity in P2P, P2MP, Ring topologies for high capacity business and mobile backhaul 4G services. Service Level Provisioning, Monitoring and Management Graphical user interfaces based upon SNMP supported by in band or out of band interface options, are available to provide users a full solutions management view from the individual node to an end-to end network and service centric view. With dedicated hardware for traffic performance monitoring, the HA-821 delivers on today’s requirement for hardware based Y.1731 latency, jitter and frame loss ratio measurements. Tiered Ethernet services as well as wireless backhaul service level performance may also be monitored through the web-based SLA portal. HFR HA-821 PRODUCT OVERVIEW Flexible and Reliable Carrier Ethernet Service HA-821 Ethernet Service Aggregation HA-821 provides G.8032v2 ring adaptation and aggregation for mobile network operators in tight urban area BST, eNodeB population either as Ethernet services demarcation, classification, traffic management , prioritization, synchronization and service inter-working in up to 64Gbps Switching fabrics. »» Compact and low power unit, ready for CPE deployment, delivers high performance and reduces operational cost»» Ethernet services aggregation & transport in 10G Metro core rings»» Standard-based MEF Carrier Ethernet 2.0 Compliance»» Synchronization source derived from SyncE Ethernet interfaces or 1588v2 PTP BC, OC and TC»» System clock meets the accuracy, stability, and holdover specifications required for Stratum 3 Timing (G.813)»» Carrier grade platform with low latency, and highly reliable service delivery with sub-50ms Ethernet Ring Protection G.8032v2»» Deep fault and performance management with Y.1731, Embedded RFC2544, Y.1564 SAT and CIR/EIR utilization per EVC/UNI for the Customer SLA Portal access   MetroBackboneWireless carrier 1,2,3 HA-805 Ethernet BackHaul Provider Wireless Carrier 3 HA-822HA-822Cell 3/4GG BBU HotelBBU Hotel Wireless Carrier 1Wireless Carrier 2 MNO BackHaulISP Metrocore Meshrings HA-821HA-821 HA-821HA-821FemtoCells chain Mesh rings   Local In-building Access Wi-Fi access MSC/BSC/RNCMSC/BSC/RNC HA-822  HA-821 SYSTEM SPECIFICATION Base System Hardware ã Ethernet Interface: 4 x 10GbE SFP+ ports + 24 x 1GbE SFP portsã Front LEDs : Alarms - Red : Critical, Major and Minor, RUN - Blue, Ports - Green : Link/Activity, Yellow: Speedã Power Supply connectors: Terminal block for -48VDC or AC : 90VAC ~ 264VAC 47Hz to 63Hzã Serial Port (RJ45 / RS-232c) & Local LAN port (10/100/1000Mbps, RJ45) ã Clock: Sync In/Out - SMA connector, BITS In/Out - RJ48cã Fan: Field replacable Synchronization ã ITU-T G.8261 / G.8262 / G.8264 SyncE on all Interfacesã SyncE Status Message supportã IEEE 1588v2 Boundary Clock(BC), Ordinary Clock(OC) and Transparent Clock(TC) ã Internal Stratum-3 Clock with Holdover to meet ITU-T G.813  Ethernet Switching (64Gbps switching capacity) ã MAC Address Table : 16K Entriesã 4096 VLANs (802.1Q C-tagged) and Stacked VLANs (802.1ad S-tagged)ã IEEE 802.1ad Provider Bridging (C-tag, S-tag) Ethernet Services ã MEF CE2.0 Compliant Carrier Ethernet E-LINE, E-LAN and E-Access  Traffic Management ã VLAN management (push/pop/swap) for C-tag and S-tagã Service Classification based on any fields combination of L2 to L4ã MEF compliant policing (CIR/CBS/EIR/EBS) with trTCM and 8 CoSã support large CBS up to 32768KB to gurantee SLA performance levels on bursts of frames which exceed the CIRã MEF HBWF(Hierarchical Bandwdith Profile) support defied by MEF 23.1ã Hierarchical QoS for 3-stage shaping and 2-stage schedling Loopback Functionality ã Station loopback supports with Layer 1 , Layer 2(MAC swap) , Layer 3 (IP Swap) and Layer 4 (TCP/UDP Port Swap) per port and EVCã Station Loopback reacts to in-band loopback requests sent from test-sets like EXFO and other test equipmentsã IEEE 802.3ah and Y.1731 LBM OAM loopback commandã Latching loopback for the in-band automatic loopback request defined by MEF standard (Future) Ethernet OAM Functionaity ã IEEE 802.3ah EFM OAM Link Management including Dying Gasp message for power failure alarmã IEEE 802.1ag Connectivity Fault Management (CFM) with 1,000 concurrent CFM sessionsã ITU-T Y.1731 Fault Management (FM) and Performance Monitoring (PM)ã support highly accurate One-Way Delay Measurement using 1588v2 PTP ã Embedded RFC2544 Test Generator and Analyzer (Throughput , Latency, Frame Loss and Back-to-Back) with automatic report generationã TWAMP(Two Way Active Measurement Protocol)-Light Reflector based on RFC5357ã MEF 30.1 FM and MEF 35 PM for other vendors interoperability (Future)ã Y.1564 Servce Activation Testing using Y.1731 LBM/LBR up to 4 sessions Ethernet Protection ã ITU-T G.8032v1 and G8032v2(2010) Ethernet Ring Protection Switching with sub-50ms Protection Switching Performance ã Link Protection with LACP as well as Static LAG using Active/Standby Performance Monitoring Service for SLA Metrics ã Ethernet SLA PMs - 24hr, 15min, 5min 1min bins for SLA PMs - Y.1731 Frame Delay , Frame Delay Variation & Frame loss - Y.1564 Multi Service Activation test ã Ethernet Services PMs - 24hr, 15min, 5min bins - Bytes counters declared Red, Yellow and Green per EVC - Packets counters Received, Transmitted and Dropped per EVC - Service Utilization per CIR ã Ethernet Port PMs - 24hr and 15min bins for Port PMs - Rx, Tx and Error Statistics - Input and Output Utilization per Portã User-defined Threshold settings and Threshold-Crossings Alerts (TCAs) for Delay , Delay Variation and Frame Loss Security ã Telnet with SSHv2ã Remote Authentication via RADIUSã Access Control List (ACL)ã IEEE 802.1x Port Authenticationã SNMPv3 with authentication and encryption (Future) Management ã SNMPv1/v2c Get & Setã Serial Port (RJ45) using CLIã Out-of-Band Management (Local LAN Port) via Telnet and SNMPã In-band Management using management VLANã FTP, secureFTP, TFTPã DHCP client with Option 82 Standard Compliance ã IEEE 802.1Q, 802.1ag, 802.1ad(LLDP) and 802.1x, 802.3ah and 802.3ad(LACP)ã ITU-T Y.1731, G.8032v1/v2, G.8261/8262/8264ã MEF 6.1, 9, 10.2, 11, 14, 20, 22.1, 23.1, 25, 26.1, 30, 33 and 35ã IEFT RFC2544, RFC5357, RFC2863(IF-MIB) , RFC3418(MIB for SNMP) , RFC4188(Bridge) , RFC2922 (Physical Topology) Physical Characteristics ã Dimensions: 44mm x 440mm x 240mm (H x W x D)ã Weight: 2.4Kgã Operating Temperature: -40°C to +65°Cã Storage Temperature: -40°C to +70°C (GR-63-CORE) ã Humidity: Up to 85% non-condensingã Power Supply: - -48DC Two Redundant Hot Swappable DC ( –40 to –60 VDC) or - 220VAC One Swappable AC(90 to 264 VAC) ã Power Consumption: Typical 50Watts/ Maximum 67Watts Regulatory ã FCC Part 15 Class Aã EN 55022, EN 55024 Class Aã CSAã UL 60950-1, IEC 60950-1, EN 60950-1, EN 61000 ã NEBS Level 3 complianceã GR-63-CORE Issue 3ã GR-1089-CORE Issue 5ã CE Mark Compliance ã ETSI 300 019 Class 1-1, Class 2-3, Class3-1ã RoHS 5/6: Compliance with Directive 2002/95/EC
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks