Case 580SR Series

of 8
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Case 580SR Series
  580-590 Super R R SERIES 2 BACKHOE LOADERS  2 NEW HYDRAULICS Effective, comfortable and top quality work can be achieved with the new flowcompensation hydraulics.  This new Load Sensing, flow compensation hydraulicsystem allows the machines to perform with co-ordination, soft operation andprecision in all movements. Three pressure control checks are now grouped together making possible an easierand immediate diagnosis in any situation.On the “Pilot” version an optional additional valve is now available for special attachments(e.g. Auger) which features a proportional control. NEW BACKHOE PILOT CONTROL OPTION The fully adjustable control lever towers (sideways / backwards & forward) ensure a comfortableworking position for all types and sizes of operators.For safety, the pilot control can be disabled. Ifrequired, the control systems can be switchedbetween backhoe and excavator patterns to suitall operators. NEW CAB Comfortable and safe operation is achieved with all-round visibility from the cab.  Ergonomics,instrumentation and design have been further improvedto enable the operator to safely concentrate on the job at hand. The   rear glass is fully tiltable. POWERSHUTTLE OR POWERSHIFT For comfort, on both models 580 Super R and 590Super R, there is a choice of PowerShuttle or PowerShift transmission  to adapt to differentuser needs and applications as required.   BACKHOELOADERS CASE 580 Super R Series 2/ 590 Super R Series 2 NEW TILTING HOOD The engine tilting hood is easy to open thanks to 2 handles  on the left side forquicker maintenance.  All checking points can be accessed from the ground. To prevent vandalism, the bonnet latch has been placed inside the cab.  3 ENGINE Make CASE - FAMILY III Model 445T/M2445TA/M2 Type Turbo-chargedTurbo-charged intercooler Capacity  4.5 l Number of cylinders 4 Bore x stroke 104 x 132 mm Injection system Direct Maximum speed without load 2450 ± 50 rpm2430 ± 50 rpm Power ISO 14396 71 kW/95 hp82 kW/110 hp Rated speed under load 2200 rpm Maximum torque, EC/97/68 400 Nm480 Nm Speed at maximum torque 1400 rpm  Air filter Dry type - two elements Oil filter Full flow type, with screw-on element The engines conform to 97/68/CE Tier 2 standards for reduced pollution.Their reliability and low cost of operation are a byword among Case users. Type of pump Gear Number of bodies 2 Maximum flow 580 Super R160 l/min590 Super R170 l/min Maximum pressure level 210 bar Filtration 7 µ HYDRAULIC SYSTEM TRANSMISSION Type PowerShuttle Speeds 4 FWD / 4 REV Maximum speeds FWD 1st, 2nd, 3rd and 4th6.4, 10.3, 21.9 and 39 kphREV 1st, 2nd, 3rd and 4th7.6, 12.3, 26.2 and 46.4 kph Torque converter stall ratio 2.31:1The management of the “PowerShift” gearbox provides smooth gearshifts, usingsynchronised gears for longer life of the mechanical parts and increasedconvenience for the operator. The inverter lever is ergonomically located to theleft of the steering wheel. Two types of transmission Type PowerShift Speed 4 FWD / 2 REV Maximum travel speeds 1st, 2nd, 3rd and 4th6.3, 11.8, 23.4 et 41.4 kph1st and 2nd7.5 and 14.0 kph Stall ratio of torque converter 2.31:1Simplicity is also synonymous with strength, that is why CASE uses a mechanicalgearbox on its backhoe-loader. It has been tested over long periods and thelatest version is the result of long experience. The hydraulic system combines thesimplicity and strength of a two bodygear pump with the ease of use of amodular type circuit. POWERSHIFTPOWERSHUTTLE 590 Super R - Series 2580 Super R - Series 2  4  Voltage 12 Volts Battery  12 V x 95 Amp/h  Alternator 90 Amp ELECTRICAL CIRCUITSTEERING The new side instrument/control panel is just one example of CASE's expertisein ergonomics. All the main indicators are centralised in the same visual areaaround the tachometer. Clear indicators allow the operator to concentrate on theessential task at hand, whilst the controls are placed in an ergonomic position close to the operator's hand for both loader and backhoe operation.The fully glazed cab  gives a panoramic view over the work area  of both theloader and the backhoe. Access is by two wide doors, with anti-slip steps. Thecab structure is certified ROPS/FOPS . The rear window swings up  for easyventilation. NOISE LEVELS LpA (inside) 580 & 590 Super R   77 dBA  LwA (outside) 580 & 590 Super R   105 dBA  CABCAPACITIES Fuel tank 128 l Hydraulic reservoir 55 l Total hydraulic circuit 118 l Engine oil 13.6 l Cooling system 24 l Gear box oil 18 l Front axle 4WD Differential7.0 lFinal reduction0.7 + 0.7 l Rear axle 4WD Total22.0 lThe high capacity fuel tank provides long periods of work between fill-ups toreduce stoppage time. 580 & 590 Super R Series 2Turning radius at ext. edge of front tyres4250 mmat bucket corner5525 mmat bucket tooth5625 mmNote: front tyres 12.5/80-18, wheel not braked, 4WD engagedMulti-disc, oil-immersed service brakes on the rear wheels, together withautomatic engagement of the front wheel drive, ensure optimum safety in alltravel conditions. BRAKES Disc diameter 203 mm Total friction area 2878 cm 2
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks