Instruction manuals

Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco XR 12000 Series Router, Release 4.2.x.pdf

Published
of 652
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
Configuration Guide for Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco XR 12000 Series Router, Release 4.2.x.
Transcript
  Americas Headquarters Cisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.com Tel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883 Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco XR 12000 Series Router  CiscoIOSXRSoftware Release4.2.x  Text Part Number: OL-26059-02  THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED ORIMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Ciscotrademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco XR 12000 Series Router  © 2010-2011 Cisco Systems, Inc. All rights reserved.    HC-iii Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco XR 12000 Series RouterOL-26059-02 C O N T E N T S Preface HC-xvii Changes to This Document HC-xvii Obtaining Documentation and Submitting a Service Request HC-xvii Preconfiguring Physical Interfaces on Cisco IOS XR Software HC-1 Contents HC-2 Prerequisites for Preconfiguring Physical Interfaces HC-2 Information About Preconfiguring Physical Interfaces HC-2 Physical Interface Preconfiguration Overview HC-3 Benefits of Interface Preconfiguration HC-3 Use of the Interface Preconfigure Command HC-3 Active and Standby RPs and Virtual Interface Configuration HC-4 How to Preconfigure Physical Interfaces HC-4 Configuration Examples for Preconfiguring Physical Interfaces HC-6 Preconfiguring an Interface: Example HC-6 Additional References HC-7 Related Documents HC-7 Standards HC-7 MIBs HC-7 RFCs HC-7 Technical Assistance HC-8 Configuring ATM Interfaces on Cisco IOS XR Software HC-9 Contents HC-10 Prerequisites for Implementing ATM HC-10 Information About ATM HC-11 VC-Class Mapping HC-12 VP-Tunnels HC-12 F5 OAM on ATM Interfaces HC-13 ILMI on ATM Interfaces HC-13 Layer 2 VPN on ATM Interfaces HC-13 Circuit Emulation over Packet on the Cisco 2-Port Channelized T3/E3 ATM and Circuit Emulation Shared Port Adapter HC-15 ATM Layer 2 QoS HC-16    Contents HC-iv  Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco XR 12000 Series RouterOL-26059-02 Configuring ATM Interfaces HC-19 Bringing Up an ATM Interface HC-20 Configuring Optional ATM Interface Parameters HC-22 How to Create and Configure a Point-to-Point ATM Subinterface with a PVC HC-24 Creating a Point-to-Point ATM Subinterface with a PVC HC-24 Configuring Optional Point-to-Point ATM PVC Parameters HC-26 How to Create and Configure a VP-Tunnel HC-29 Creating and Configuring a VP-Tunnel on an ATM Interface HC-30 Creating and Configuring Subinterfaces with PVCs on a VP-tunnel HC-33 How to Configure a Layer 2 Attachment Circuit HC-36 Creating a Layer 2 Port Mode AC HC-36 Configuring Optional Parameters on a Layer 2 Port Mode AC HC-38 Creating an ATM Layer 2 Subinterface with a PVC HC-40 Configuring Optional ATM Layer 2 PVC Parameters HC-41 Creating an ATM Layer 2 Subinterface with a PVP HC-44 Configuring Optional ATM Layer 2 PVP Parameters HC-45 How to Create and Configure a VC-Class HC-48 Creating and Configuring a VC-Class HC-48 Attaching a VC-Class to a Point-to-Point ATM Main Interface HC-51 Attaching a VC-Class to a Point-to-Point ATM Subinterface HC-52 Attaching a VC-Class to a PVC on an ATM Subinterface HC-53 How to Configure ILMI on ATM Interfaces HC-55 Enabling ILMI on an ATM Interface HC-55 Disabling ILMI on an ATM Interface HC-57 How to Configure Channelized ATM HC-59 How to Configure Clear Channel ATM with Virtual Path (VP) Tunnels HC-62 Attaching a Service-Policy to an Attachment Circuit HC-65 ATM Configuration: Examples HC-68 ATM Interface Bring Up and Configuration: Example HC-68 Point-To-Point ATM Subinterface Configuration: Example HC-68 VP-Tunnel Configuration: Example HC-70 Layer 2 AC Creation and Configuration: Example HC-71 VC-Class Creation and Configuration: Example HC-71 Channelized ATM Configuration: Example HC-72 Clear Channel ATM with Virtual Path (VP) Tunnels Configuration: Example HC-73 ATM Layer 2 QoS Configuration: Examples HC-73 Verifying ATM Layer 2 QoS Configuration: Examples HC-75 Additional References HC-77 Related Documents HC-77 Standards HC-77

cv andreea dobre

Jul 23, 2017

Chap 00177

Jul 23, 2017
Search
Similar documents
View more...
Tags
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks