Documents

Force10-S4810-SCG-V9 3 0 0

Categories
Published
of 20
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
Force10
Transcript
    Dell Networking S4810 and Dell Force10 S4810 Switch Configuration Guide for EqualLogic SANs Dell Storage Engineering April 2014 SISfeedback@Dell.com     2 SCG1000 Dell Networking S4810 and Force10 S4810 Configuration Guide for EqualLogic SANs Revisions Date Description November 2012 Initial release September 2013 Updated for Dell networking branding February 2014 Updated for FTOS v9.3.0.0 April 2014 Minor update © 2014 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc. is strictly forbidden. For more information, contact Dell. Dell, the Dell logo, and the Dell badge, PowerConnect, EqualLogic, and Force10 are trademarks of Dell Inc.    3 SCG1000 Dell Networking S4810 and Force10 S4810 Configuration Guide for EqualLogic SANs Table of contents Revisions ............................................................................................................................................................................................. 2   1   Introduction ................................................................................................................................................................................ 5   1.1   Audience ........................................................................................................................................................................... 5   1.2   Switch details ................................................................................................................................................................... 5   1.3   Cabling diagram .............................................................................................................................................................. 7   2   Dell recommended switch configuration ............................................................................................................................. 8   2.1   Hardware configuration ................................................................................................................................................. 8   2.2   Delete startup configuration ......................................................................................................................................... 8   2.3   Configure out of band (OOB) management port ..................................................................................................... 8   2.4   Configure route for OOB management port (optional) .......................................................................................... 9   2.5   Configure login credentials ........................................................................................................................................... 9   2.6   Enable switch ports ........................................................................................................................................................ 9   2.7   Enable Jumbo Frames.................................................................................................................................................. 10   2.8   Configure flow control ................................................................................................................................................ 10   2.9   Configure spanning tree on edge ports .................................................................................................................... 10   2.10   Configure port channel for LAG ................................................................................................................................. 10   2.11   Configure QSFP ports for LAG.................................................................................................................................... 10   2.12   Save configuration ......................................................................................................................................................... 11   2.13   Configure additional switch ......................................................................................................................................... 11   3   Configure Data Center Bridging (DCB) (Optional)............................................................................................................ 12   3.1   Disable 802.3x flowcontrol on SFP+ ports............................................................................................................... 12   3.2   Disable 802.3x flowcontrol on QSFP ports .............................................................................................................. 12   3.3   Enable DCB and reload ................................................................................................................................................ 12   3.4   Create tagged VLAN for all ports and port-channels ............................................................................................. 12   3.5   Configure DCB policies ............................................................................................................................................... 13   3.6   Apply policies to switch ports ..................................................................................................................................... 13   3.7   Save configuration ........................................................................................................................................................ 13   3.8   Configure additional switches .................................................................................................................................... 14   4   Reverting from DCB to non-DCB configuration (Optional) ............................................................................................ 15   4.1   Disable DCB ................................................................................................................................................................... 15   4.2   Remove DCB policies and apply standard flow control ........................................................................................ 15      4 SCG1000 Dell Networking S4810 and Force10 S4810 Configuration Guide for EqualLogic SANs 4.3   Revert to default VLAN ID on switch and arrays ..................................................................................................... 16   4.4   Save configuration ........................................................................................................................................................ 16   4.5   Reload ............................................................................................................................................................................. 16   4.6   Verify DCB status ........................................................................................................................................................... 16   4.7   Configure additional switch ........................................................................................................................................ 16   5   Optional stack configuration ................................................................................................................................................. 17   5.1   Delete startup configuration on first switch ............................................................................................................ 17   5.2   Configure stack on the first switch ............................................................................................................................ 17   5.3   Delete startup configuration on the second switch .............................................................................................. 17   5.4   Configure stack on the second switch ..................................................................................................................... 18   5.5   Verify stack configuration ............................................................................................................................................ 18   5.6   Configure out of band (OOB) management port ................................................................................................... 18   5.7   Configure route for OOB management port (optional) ........................................................................................ 18   5.8   Configure login credentials ......................................................................................................................................... 19   5.9   Configuring switch ports ............................................................................................................................................. 19   5.10   Save configuration and reload .................................................................................................................................... 19   Additional resources ....................................................................................................................................................................... 20  
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks