Documents

Furuno Vhf Fm-8500

Categories
Published
of 3
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
Furuno
Transcript
  FM-8500  Changing the MMSI and System Settings **This procedure will revert all System Settings to Factory Default** 1.Turn on the power and press the NMI switch, located on the CONT PCB, which is accessed by opening the bottom plate of the FM-8500.2.Turn the power off, then back on again. The next screen appears.   4.Press the SELECT  key. The setup menu appears. Setup menu<>12346 9 ALM 5.Press the 9  key to display the system menu. System menu<>VP ID DSC RT CHPO 6.Select ID  press ENT . System<>VP ID  DSC RT CHPO 7.Enters the ship’s MMSI number, press CANCEL  if incorrect. Press ENT  toaccept. Press ENT  to return to the system menu. 7   Clear < > NO RAM EEROM ALL 3.Select  EEROM  and press ENT . After about 15 seconds, “  Turn off the power ”  appears on the screen.4.Turn the power off, then back on. The next screen appears.   TEST VHF CH70 AUTO  RT 1-Mode: USA/ WX <>OFF[1] ON[2] 9.Press 2  to select USA mode. Press CANCEL to exit to the system menu.10.The next procedure is for the second VHF only. This will block the CH 70 DSC receiver from responding to DSC calls. Only one VHF onboard should be set for automatic DSC.11.Select DSC  from the system menu press ENT . DSC: receiver<> CH70[1] VHF[2] 12.Press the 2  key to select VHF.13.All other settings are to be at default (see Pgs 20 thru 26 of the Installation Manual).14.Press ENT .15.Select P  at the system menu. System<>V P ID   DSC RT CH PO 16.Select ON  then press ENT . Press Cancel until the main screen returns.17.Next perform the self test procedure.18.Select a channel not in use. Press and hold down the PTT switch for more than onesecond before starting the self test.19.Follow the procedure on the next page. 8 FM-8500 Changing the MMSI and System Settings (Continued)   8.Select RT and press ENT . System<>VPID DSC RT  CHPO  Watch VHF CH 703*Test in progress* please wait!* Completed* Daily test VHF DSC: GOODTEST 20.If you did not press the PTT switch, except VSWR will appear instead of GOOD .21.The Distress Alarm will sound and the red LED near the DISTRESS  keylight. Press  ALARM STOP to silence the alarm.22.Record any errors (see Operator’s and Installation Manuals).23.Press CANCEL to end the test. Press 9 FM-8500  Changing the MMSI and System Settings  (Continued)

Royal Drought

Jul 23, 2017
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks