latitude-d810_Service Manual_en-us.pdf

of 51
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Dell™ Latitude™ D810 Service Manual Before You Begin System Components Memory Modules, Mini PCI Card, Modem, and Modules Internal Card With Bluetooth® Wireless Technology The Coin-Cell Battery Hard Drive Center Control Cover Display Assembly Keyboard Palm Rest Smart Card Reader PC Card Reader Speakers Microprocessor Thermal-Cooling Assembly Microprocessor Module Video Card Assembly Fans System Board Flashing the BIOS Pin Assignments for I/O Connectors  Notes, Notices, and C
  Dell™ Latitude™ D810 Service Manual   Before You Begin System Components Memory Modules, Mini PCI Card, Modem, and Modules Internal Card With Bluetooth ®  Wireless Technology The Coin-Cell Battery Hard Drive Center Control Cover Display Assembly Keyboard Palm Rest Smart Card Reader PC Card Reader Speakers Microprocessor Thermal-Cooling Assembly  Microprocessor Module  Video Card Assembly  Fans System Board Flashing the BIOS Pin Assignments for I/O Connectors  Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2005 Dell Inc. All rights reserved.  Reproduction in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden. Trademarks used in this text: Dell  , the DELL  logo, and Latitude  are trademarks of Dell Inc.; Microsoft   and Windows  are registered trademarks of Microsoft Corporation; Bluetooth  is a trademark owned by Bluetooth SIG, Inc. and is used by Dell Inc. under license. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Model PP02X   February 2005 Rev. A00   Back to Contents Page  NOTE: A NOTE indicates important information that helps you make better use of your computer.  NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.  CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.  Back to Contents Page  Before You Begin Dell™ Latitude™ D810 Service Manual   Preparing to Work Inside the Computer Recommended Tools Computer Orientation Screw Identification Preparing to Work Inside the Computer 1.Ensure that the work surface is flat and clean to prevent scratching the computer cover. 2.Save any work in progress and exit all open programs. 3.Turn off the computer and all attached devices. 4.If the computer is connected to a docking device, undock it. 5.Disconnect the computer from the electrical outlet. 6.To avoid possible damage to the system board, wait 10 to 20 seconds and then disconnect any attached devices. 7.Disconnect all other external cables from the computer. 8.Remove any installed PC Cards from the PC Card slot. 9.Close the display and turn the computer upside down on a flat work surface. 10.Slide and hold the battery-bay latch release on the bottom of the computer, and then remove the battery from the bay. 11.Remove any installed memory modules, MiniPCI cards, and modules, including a second battery if one is installed. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in Dell's product documentation, or as directed by Dell's online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.  NOTICE: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a microprocessor by its edges, not by its pins.  NOTICE: To avoid damaging the computer, perform the following steps before you begin working inside the computer.  NOTE: Ensure that the computer is off and not in a power management mode. If you cannot shut down the computer using the computer operating system, press and hold the power button for 4 seconds.  NOTICE: To avoid damaging the system board, you must remove the main battery before you service the computer.    Recommended Tools The procedures in this manual require the following tools: l   #1 Phillips screwdriver l  ¼ -inch flat-blade screwdriver l   Small plastic scribe l   Flash BIOS update program floppy or CD Computer Orientation Screw Identification When you are removing and replacing components, print this section as a tool to lay out and keep track of the screws. The placemat provides the number of screws and their sizes. 1 back 2 right 3 front 4 left Optional Module: (1 each) Modem: (1 each) Hard Drive: (2 each)   Microprocessor Fan: (1 each) Keyboard: (2 each) Display Assembly: (2 each) Video Card Fan: (1 each) Display Latch: (2 each) Display Panel Cable: (1 each) Display Panel: (8 each) Speakers: (1 each) PC Card Reader (4 each) Palm Rest: (4 each) (13 each) System Board: (3 each) (1 each) Smart Card Reader (1 each)
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks