Brochures

Metroliner

Categories
Published
of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
Catalogo metroliner
Transcript
  SPECIFICATIONSMID AXLE FORWARD6x4 8x4 10x4 Metro-Liner THE NEW BREED         3        4        0        0        3        4        0        0        3        4        0        0        1        8       5        3        1        8       5        3        1        8       5        3 267026702670285285285100810081008WBWBWB20002000ROHROHROH  METRO-LINER MID AXLE FWD (MAF) RIGID SPECIFICATIONS (6x4, 8x4, 10x4) ENGINE & TRANSMISSION ENGINE CUMMINS ISC 260, 8.3 litre, 6 cylinder, 24 ValveRated Power 186kW (250Hp) @ 2,200 rpmPeak Power 194kW (260hp) @ 2,000 rpmPeak Torque 1,085Nm (800ftlb) @ 1,200 – 1,600 rpm ENGINE BRAKE E-Brake by Jacobs Exhaust BrakeRetarding power up to 130kW (175Hp)  AIR INTAKE & FILTER DONALDSON 279mm (11”) Single dry type elementUnder bonnet air intake FILTERS Oil : Single spin-on disposableFuel : Single spin-on disposableWater : Single spin-on disposable  AIR COMPRESSOR Single CYL. 530liters/min (18.7 cfm) WABCO compressor  AIR DRYER Bendix AD-IS air dryer  ALTERNATOR LEECE NEVILLE 12Volt / 100Amp Brushless STARTER 12V STANDARD STARTER DELCO 38MTKey type start & stop FAN Heavy duty viscous drive with 8 blade nylon fan RADIATOR NL4, Frontal area 962in󰂲 EXHAUST Single LHS 127mm (5’’) vertical exhaustmuffler with heat shield, post mountedStandard height above ground: 3,400mm TRANSMISSION EATON RTLO-12913A (13 speed)13 speed overdrive transmissionFwd gears :13, Rev gears :2High : 0.73 Low : 12.31Torque rating : 1,250ftlbs / 1,695Nm CLUTCH EATON 335mm (14’’)Easy Pedal with VCT Plus Air assist clutch release FRONT & REAR AXLES FRONT AXLE MACK FXL 14.6 (6,600kg Capacity) Axle position: Mid Axle Fwd (MAF) 1,008mm BFA (8x4 & 10x4 twin FXL 14.6 mechanical load share) FRONT SUSPENSION Two 1,321mm (52’’) long 3-leaf parabolicsprings with standard shock absorbers FRONT BRAKES Front automatic slack adjustersType 20 brake boostersS’ Cam with iron drums STEERING GEAR M100P steering gear REAR AXLE MERITOR RT 40-145GPNominal capacity : 18,000kg (40,000lbs)Front mounted carriersRatio 4.33:1 REAR SUSPENSION MAXLITE 40 air suspensionNominal capacity : 18,000kg (40,000lbs)Out board mounted shock absorbers REAR BRAKES Rear automatic slack adjustersType 24 / 30 brake boostersS’ Cam (standard service) DRIVELINE SPICER 1710 Main & Inter-axle drive shafts WHEELS Front & Rear steel disc22.5” x 8.25” silver steel tubeless rims TYRES Front: MICHELIN XZE-2 11R22.5 – 16 plyRear: MICHELIN XDE-2 11R22.5 – 16 ply CHASSIS FRAME  Advantage 300mm x 90mm x 7mm138,000psi / RBM 1,730,000in lb WHEELBASE 4,325mm (170”)Rear overhang 1,515mm (59.6”) CAB SUPPORT Front: Two metalistic pivot mountsRear: Air isolation with dual shock absorbers FRONT BUMPER Light weight alloy bumper(no light provision)  AIR TANK  1 x steel tank mounted parallel to the frame withmanual drain cords FUEL TANKS One 265 litre alloy round 660mm (26’’) diameter LHS(silver satin finish) Full length stepsSteps only RHS BATTERIES Two 12volt Bulldog batteries, mounted rear of theLH fuel tank with a black battery box cover ELECTRICAL Chassis harness with flame proof ‘fuel-haul’compliant protective conduit CAB SHELL FUSION CAB (100mm deeper cab)ECE29 (cab crash test) compliant cab,fibreglass bonnet and polyfibre fenders withsplash apronsBonnet tilts forward 75° with spring assistStainless bug screen integrated with grilleExternal sunvisorTwo piece windscreen INTERIOR Trim: ‘Diamond Plate’ grey cloth trimDash: Charcoal dash with integrated cup holdersInsulation: internal heat/noise rejection liningFloor: Black rubber matRoof: Slate grey vinyl roof trim withcourtesy lights COURTESY LAMPS Drivers/Passengers door entry lighting CLIMATE CONTROL HVAC integral cab air conditioner/heaterElectronic controlsReplaceable dust intrusion filter SOUND SYSTEM: Mack radio / CD player INSTRUMENTS & GAUGES Standard instruments:Speedometer / odometer (electronic)Tachometer / hourmeter (electronic) Voltmeter, air pressure, fuel levelEngine coolant temperatureOil pressureDriver information display (std) SEATS Driver: ISRI air-ride driver’s seatPassenger: ISRI fixed cushion STEERING WHEEL BULLDOG soft touch 457mm (18’’)diameter, rubber grip Adjustable tilt and telescopic steering column HEADLAMPS HELLA integral light / indicator unit withpolycarbonate protective moulding HORNS 2 x roof mounted, air horn trumpets2 x under bonnet mounted, electric MARKER LAMPS 5 roof-mounted amber lights MIRRORS Heated ‘West Coast’ style withstainless steel arms and bracketsLHS and RHS spotter mirrors WINDSCREEN WIPERS Electronic variable-speed, intermittent wiperswith washer reservoir mounted under bonnet PAINT TYPE AND COLOUR Cab / sleeper: Single non-metallic cab colourMACK WhiteChassis: Single non-metallic chassis colourMACK Black FACTORY OPTIONS ENGINE CUMMINS ISC 285, 8.3 litre, 6 cylinder, 24 ValveRated Power 205kW (275Hp) @ 2,200 rpmPeak Power 213kW (285hp) @ 2,000 rpmPeak Torque 1,085Nm (800ftlb) @ 1,200 – 1,600 rpmE-Brake by Jacobs Exhaust BrakeRetarding power up to 130kW (175Hp)CUMMINS ISC 300, 8.3 litre, 6 cylinder, 24 ValveRated Power 213kW (285Hp) @ 2,200 rpmPeak Power 224kW (300hp) @ 2,000 rpmPeak Torque 1,166Nm (860ftlb) @ 1,300 – 1,600 rpmE-Brake by Jacobs Exhaust BrakeRetarding power up to 130kW (175Hp)CUMMINS ISC 315, 8.3 litre, 6 cylinder, 24 ValveRated Power 224kW (300Hp) @ 2,200 rpmPeak Power 235kW (315hp) @ 2,000 rpmPeak Torque 1,166Nm (950ftlb) @ 1,300 – 1,600 rpmE-Brake by Jacobs Exhaust BrakeRetarding power up to 130kW (175Hp)CUMMINS ISL 330, 8.9 litre, 6 cylinder, 24 Valve Advertised Power 246kW (330Hp) @ 2,200 rpmPeak Torque 1,559Nm (1150ftlb) @ 1,300 – 1,600 rpmC Brake by Jacobs, Compression BrakeRetarding power up to 246kW (330Hp) with fanCUMMINS ISL 350, 8.9 litre, 6 cylinder, 24 Valve Advertised Power 261kW (350Hp) @ 2,200 rpmPeak Torque 1,424Nm (1050ftlb) @ 1,300 – 1,600 rpmC Brake by Jacobs, Compression BrakeRetarding power up to 246kW (330Hp) with fan PTO OPTIONS Rear of engine PTOChelsea transmission mounted PTO EXHAUST Single LHS 127mm (5’’) vertical exhaustmuffler with heat shield, post mountedStandard height above ground: 4,200mmSingle 127mm (5”) underframe muffler TRANSMISSION MACK T310MLREATON RTO- 11909ALL ALLISON 3200 P (6 spd auto) ALLISON 3500 P (6 spd auto) ALLISON 3500 PR (6spd auto / retarder)(Allison transmission not available with ISL 330hp) CLUTCH EATON ‘SOLO’ with VCT Plus FRONT SUSPENSION Heavy duty shock absorbers WHEEL TYPE 10-stud 9” (285mm PCD)steel disc10-stud 8¼” or 9” (285mm PCD)satin finish alloy disc10-stud 8¼” or 9” (285mm PCD)polished alloy disc10-stud 8¼” or 9” (285mm PCD)DURABRIGHT alloy disc FRONT TYRES MICHELIN XZY-2 11R22.5MICHELIN XZE-2 275/70R22.5MICHELIN XZE-2 295/80R22.5MICHELIN XZY 295/80R22.5MICHELIN XZE-2 315/80R22.5 REAR TYRES MICHELIN XDE-2 275/70R22.5MICHELIN XZE-2 275/70R22.5MICHELIN XDY 295/80R22.5MICHELIN XDE-2 295/80R22.5MICHELIN XZE-2 295/80R22.5 REAR AXLES & SUSPENSION MACK 200 series/Mack Camelback (Mech) SS462MERITOR RT40-145GP / MACK AL460 (air)MERITOR RT40-145GP / MIL-M (mech)MERITOR RT46-160GP / HN462 (mech)DANA DSH40P / AL460 (air)DANA DSH40P / HN402 (mech)10 x 4 configuration MERITOR RT40-145GP / AL460 & Hendrickson HLM2 liftable lazy axleNote: not all combinations are available for each variant REAR BRAKES S’ Cam (severe service)Disc brakesType 30/30 brake boosters ABS or ABS & Traction Control INTER-AXLE / WHEEL LOCKS DCDL on one axle onlyDCDL’s on both axles(on vendor axles only)Power Divider standard with Mack axles REAR AXLE RATIOS MACK axle ratiosFrom 4.35 To 5.95MERITOR axle ratios from toFrom 4.10 To 6.83DANA axle ratios from toFrom 4.10 To 6.83 LIGHTWEIGHT HUBS & DRUMS Rear alloy hubs & centrifuse brake drums(only available with 285mm PCD disc wheels) FRAME  Advantage 300mm x 90mm x 8mm156,000psi / RBM 1,940,000in lb Advantage 300mm x 90mm x 9.5mm184,000psi / RBM 2,240,000in lb WHEELBASE (WB) 4,310mm (169.7”) to 6,165mm (242.7”)  AFTERFRAME (RO) 1,445mm (56.9”) to 2,810mm (110.6”)rear overhang(All chassis lengths can be specified with tapered rail ends) BULLBAR / BUMPER / FUPS  A range of bumper & bullbar designs are available, in either polished alloy or stainless steel. Please check with your area sales representative for FUPS compatibility REAR TAIL LAMPS LED lampsReverse alarm FUEL TANKS Two 265litre alloy tanksOne 350litre alloy tank RHS with steps LHSTwo 350litre alloy tanksTwo 350litre alloy tanks, LHS split for hydraulics(Polished fuel tanks are available for all tank configurations) BATTERY MOUNTS Chrome battery box covers CAB EXTERIOR LH & RH power mirrorsLH down mirrorOne piece windscreenBody Builder chassis connections CAB INTERIOR Mack Premium radio with BluetoothCentral Locking / Power windows COMMUNICATIONS GME TX835 CB radioGME TX4400UHF radio DRIVERS SEAT ISRI luxury air ride driver’s seat with upper and lowerlumbar support, and fore/aft seat cushion adjustment.ISRI ‘Big-Boy’ air-ride driver’s seat with cloth head rest upper, side and lower lumbar support, oscillating base, and fore / aft seat cushion adjustment METRO-LINER FACTORY ACCESSORIES Many factory fitted accessories (lights, turntables, etc)which are not listed, are also available. All customers areencouraged to see their Authorised Dealer for full details. THE NEW BREED The information in this brochure was current at the time of publication. Mack Trucks reserves the right to make changes in specications, equipment and design, or to discontinue models, options or extras without notice at any time. MACK and the Bulldog design are registered trademarks. All rights reserved. V-MAC is a registered trademark. All rights reserved.  V2.02.09
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks