Documents

ReadMe_EN

Categories
Published
of 3
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
KMS Micro
Transcript
   ┌───────────────────────────────────────────────────────────────────────────────────┐│ KMSmicro 5.0.0 │├───────────────────────────────────────────────────────────────────────────────────┤│ The local KMS server to activate Windows 7 - 8.1, Office 2010-2013 VL editions ││ This program does not activate Retail editions. │└───────────────────────────────────────────────────────────────────────────────────┘System Requirements: · Any PC/x86 compatible computer (even running inside the virtual machine) · 250-512 MB RAM · Keyboard · Mouse · You can run from a flash drive · The requirements for disk space (approx.):    200 MB Features: · Счетчики активации KMS-сервера накручиваются при запуске. · KMS-server activation of counters screwed up on startup in the host computer.I. Before using───────────────────────Make sure that the laptop port 1688 is not used by another activator: ZWT KMS Keygen and activators that use it.Remove these activators, stop the process of ZWT KMS KeygenII. Running KMSmicro───────────────────Run KMSmicro.exeIII. Setting date / time for KMSmicro───────────────────────────────────For a successful KMS-activation is important that the time on the computer and on-activatedKMS-server differed by no more than ± 1.5 hours. Thus, using the exchange-Xia UTC (Coordinated Universal Time), which may be different from thatis displayed on the computer's clock.Therefore, it is important to set date / time KMSmicro.For 99% of the users apply the following procedure: 1. Start KMSmicro. 2. Replace KMSmicro Console time zone that corresponds to the time-zone-activated computer (supplied KMSmicro its time zone is set to UTC +04 (GMT, Greenwich). To do this, press Z, then again Z, select your time zone After setting the time zone KMSmicro Console is turned off. 3. Wait until the console is shut down and turn it on again. ****All keystrokes on the keyboard by pressing Entr.****When you run KMSmicro its time is automatically synchronizedwith time-activated computer (that runs KMSmicro).Conveniently, you can activate without readjustment all the computers in your region(provided that they are exposed to correct / same time zone).   4. After setting up KMSmicro Console tab Settings you can set a tick on Run QEMU without GUI , in this mode, the console will be run in a hidden form.IV. Product Activation──────────────────────Windows 8.1 and Office 2010, Office 2013 installed on it: 1. Set in TAP-Windows Adapter. To do this, go to the Settings tab of the program and click the Install TAP . Once the adapter is installed it be renamed to tap1  2. Select the tab of the Network Connections of your Network adapter and TAP-Windows Adapter tap1 by holding down the Ctrl key and pressing the right mouse button, select the menu item Setting the Bridge  3. On the Settings tab, select the network setup Network through the TAP interface  4. In the main window, click Start KMSmicro Console and look forward to when KMSmicro Console boot. 5. Activate.* You can skip point number 2, the activation takes place and no association Network Bridge. But KMSmicro Console will not have access to the Internet.Complicated? Yes, more difficult than it was in previous versions of KMSmicro. But it is not our whim, this is due to changes in the operating system Windows 8.1. TAP adapter is then mounted you can not delete it in the system or not interfere.Windows 7 or Office 2010-2013 installed on Windows 7-8: 1. On the Settings tab, select the network setup Network 127.0.0.2:1688  IP address 127.0.0.2 2. In the main window, click Start KMSmicro  and look forward to when KMSmicro Console boot. 3. Activate.V. Activation may not occur for the following reasons:─────────────────────────────────────────────────────── 1. Product key loose / not mounted. 2. You are trying to activate an unsupported product (Retail Windows 8 - 8.1). 3. The counter value of activations on KMSmicro not sufficient for successful activation (the counter is not screwed up ). Follow the winding counters: <C>. This situation can only occur in one if: you changed the date on the computer-activated and KMSmicro more than 30 days after starting KMSmicro. 4. The server was unable to connect to the computer, the computer has busy port 1688. Other activators or unavailable TAP adapter. Remove all the activators and cracks for the Office of 2010-13. 5. Time-zone of activated computer is different from the time zone KMSmicro. Adjust the settings for date / time. 6. Try changing to the KMS-server any of 127.0.0.2-127.127.127.254 range, while using TAP Interface instead of the KMSmicro (KMSMICRO-PC)  to set the real IP address KMSmicro Console, which can be viewed by clicking on the console press I and press Enter. 7. Our KMSmicro is not compatible with your computer. This has never happened, so you are very unlucky :( 8. There has been something completely unforeseen, beyond the scope of this FAQ.If you encounter problems, when asking for help provide maximum possibleinformation: · System structure; · Description of the issue; · Post protocols / screenshots; · If the folder is a file qemu stderr.txt, lay out its contents.VI. Some KMSmicro Console service commands ───────────────────────────────────────── Ctrl+Alt+U - aligns the window KMSmicro, if you changed it with the mouse Ctrl+Alt - switches the cursor to the window / out of the windowAdvice: The mouse in the window KMSmicro Console can not work at all, all the commands are executed via keyboard.┌─────────────────────────────────────────────────────────────────────────────┐│ Our KMSmicro address 127.0.0.1-127.0.0.254 (localhost), port 1688. ││ KMSmicro has access to the Internet for time synchronization. │└─────────────────────────────────────────────────────────────────────────────┘┌─────────────────────────────────────────────────────────────────────────────┐│ Changes in version 5.0.0 ││ · Activation Support for Windows 8.1 │ └─────────────────────────────────────────────────────────────────────────────┘┌─────────────────────────────────────────────────────────────────────────────┐│ Changes in version 4.9.0. Office: ││ · Activation Support for Office 2010-2013 on Windows 8.1 │ │ · New User Interface. │└─────────────────────────────────────────────────────────────────────────────┘
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks