Documents

S102.C.0814_TestMaster Line Card_rs.pdf

Categories
Published
of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
® AIRMO, INC. 9445 Evergreen Blvd. NW, Minneapolis, MN USA 55433-5840 PHONE: (763) 786-0000 FAX: (763) 786-4622 EMAIL: airmo@airmo.com WEBSITE: www.airmo.com S102.C.0814 © 2014 All Rights Reserved. Contents subject to change. All trademarks are the property of their owners. Hydrostatic Test Tools  Pressures from 5,000 psi to 40,000 psi (345 bar to 2,758 bar)  Collet grip and seal on tube OD  Low-marking collet design  Manual lever, single or dual air-operated models 
Transcript
  ®  AIRMO, INC. 9445 Evergreen Blvd. NW, Minneapolis, MN USA 55433-5840PHONE:  (763) 786-0000 FAX: (763) 786-4622 EMAIL: airmo@airmo.com WEBSITE:  www.airmo.com S102.C.0814 © 2014 All Rights Reserved. Contents subject to change. All trademarks are the property of their owners.   Hydrostatic Test Tools  Pressures from 5,000 psi to 40,000 psi (345 bar to 2,758 bar)  Collet grip and seal on tube OD  Low-marking collet design  Manual lever, single or dual air-operated models  Pressure-compensated grip  Model LPH Series:  Pressures to 5,000 psi (345 bar)  Model LPHE Series: Pressures to 5,000 psi (345 bar) (Helium)  Model 64 Series: Pressures to 10,000 psi (689 bar) Model 264 Series: Pressures to 20,000 psi (1,379 bar)  Model 364 Series: Pressures to 30,000 psi (2,068 bar)  Model 464 Series: Pressures to 40,000 psi (2,758 bar) Model 500 Series Hydrostatic Test Tools  Pressures to 20,000 psi (1,379 bar)  Air-actuated for positive pre clamp and quick collet release  Suitable for hand-held, suspended, or fixed mounting  Automated applications Speciality Tools Model 350 Series Hydrostatic Bottle and Cylinder Test Tools  Pressures to 15,000 psi (1,034 bar)  Pressure testing of female-threaded products Model 30096 Burst Test Chambers  Pressures to 30,000 psi (2,068 bar)  Manual or electronic control for destructive and non-destructive testing TestMaster® Hydrostatic Test Tools offer fast, snap-on coupling and positive sealing of tubes, tube assemblies, and systems. Use with Airmo Hydrostatic Pressure Systems or Burst Test Chambers. Equipment engineered to customer application requirements. To learn more about TestMaster® products: visit our website at www.airmo.comor call 1-800-394-0016 “  U  NPARALLELED P  ERFORMANCE AND S  AFETY U  NDER P  RESSURE!” ® Model HPS Series Hydrostatic Pressure Systems  Pressures to 30,000 psi (2,068 bar)  Fast cycle times for tube and pipe , pressure and leak testing  Portable configurations available Hydrostatic Pressure Systems and Test Tooling Model 310 Series Hydrostatic Hose Test Tools  Pressures to 30,000 psi (2,068 bar)  Pressure testing of male-threaded fittings and hose ends Systems Model 300 Series Hydrostatic Test Tools  Pressures to 5,000 psi (345 bar)  Inside tube grip and sealing for pressure and leak testing  ®  AIRMO, INC. 9445 Evergreen Blvd. NW, Minneapolis, MN USA 55433-5840PHONE:  (763) 786-0000 FAX: (763) 786-4622 EMAIL: airmo@airmo.com WEBSITE:  www.airmo.com   Airmo Inc. Pressure Technologies is a global supplier dedicated to the design and manufacture of systems, tools, high-pressure accessories and components used for hydrostatic pressure testing, end forming, and tube expansion applications. Our focus on delivering innovative, quality products engineered to customer specifications enhances our capability to be a total solutions provider. Industries include: aerospace, defense, energy, HVAC, mobile equipment, nuclear, oil, gas, subsea, and tube and pipe mills.  About Us “  U  NPARALLELED P  ERFORMANCE AND S  AFETY U  NDER P  RESSURE!” ® Hydrostatic pressure systems and tooling are used for pressure and leak testing of tubes, assemblies, and systems. Service options include water, oil, Skydrol and helium. Pressures to 40,000 psi (2,758 bar).Hydraulic power packs and size-dedicated tools for expansion, reduction, beading, flaring, or swaging of tube ends. Pressures to 3,000 psi (207 bar). Tube expansion or hydro-mechanical systems and tooling use pressurized water to rapidly expand tubes or pipes. Pressures to 30,000 psi (2,068 bar).Airmo high-pressure accessories and components supply pressure, connect equipment, channel fluids, and control pressures to improve system performance. Pressures to 60,000 psi (4,137 bar). Quality, Durability, Performance, and Safety built into every system and tool is the Airmo advantage. To learn more: visit our website at www.airmo.comor call 1-800-394-0016
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks