Instruction manuals

SDBMF-00915B0T2: SD card Socket Datasheet

Published
of 3
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
SD card Socket Datasheet
Transcript
  PART NO.ECN # REV- A REVISIONS DESCRIPTION  DRAWN DATE DATE DATECHECKD APPRVDVeena  16/04/09 16/04/09 30/04/09 Suresh Farnell RELEASED SDBMF-00915B0T2  This data sheet and its contents (the Information )belong to the Premier Farnell Group(the Group )or are licensed to it. No licence is granted for the use of it other than forinformation purposes in connection with the products to which it relates. No licenceof any intellectual property rights is granted. The Information is subject to change with-out notice and replaces all data sheets previously supplied. The Information supplied isbelieved to be accurate but the Group assumes no responsibility for its accuracy orcompleteness, any error in or omission from it or for any use made of it. Users of thisdata sheet should check for themselves the Information and the suitability of the prod-ucts for their purpose and not make any assumptions based on information included oromitted. Liability for loss or damage resulting from any reliance on the Information oruse of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)is excluded. This will not operate to limitor restrict the Group's liability for death or personal injury resulting from its negligence.SPC MULTICOMP is the registered trademark of the Group. ©Premier Farnell plc 2009.  TOLERANCES: DRAWN BY:VeenaSureshFarnellCHECKED BY:APPROVED BY:DATE: DRAWING TITLE: SD Memory Card Push-Push W/Connector 74273_DWG M10002119 16/04/09DATE:SIZESCALE: NTS U.O.M.: mm SHEET: 1 OF 3DWG NO. ELECTRONIC FILE REV A 16/04/09 A DATE:30/04/09UNLESS OTHERWISESPECIFIED,DIMENSIONS AREFOR REFERENCEPURPOSES ONLY. Dimensions : Millimetres Without CardCard InsertedWrite Protect : LockCard InsertedWrite Protect : Unlock  PART NO.ECN # REV- A REVISIONS DESCRIPTION  DRAWN DATE DATE DATECHECKD APPRVDVeena  16/04/09 16/04/09 30/04/09 Suresh Farnell RELEASED SDBMF-00915B0T2  This data sheet and its contents (the Information )belong to the Premier Farnell Group(the Group )or are licensed to it. No licence is granted for the use of it other than forinformation purposes in connection with the products to which it relates. No licenceof any intellectual property rights is granted. The Information is subject to change with-out notice and replaces all data sheets previously supplied. The Information supplied isbelieved to be accurate but the Group assumes no responsibility for its accuracy orcompleteness, any error in or omission from it or for any use made of it. Users of thisdata sheet should check for themselves the Information and the suitability of the prod-ucts for their purpose and not make any assumptions based on information included oromitted. Liability for loss or damage resulting from any reliance on the Information oruse of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)is excluded. This will not operate to limitor restrict the Group's liability for death or personal injury resulting from its negligence.SPC MULTICOMP is the registered trademark of the Group. ©Premier Farnell plc 2009.  TOLERANCES: DRAWN BY:VeenaSureshFarnellCHECKED BY:APPROVED BY:DATE: DRAWING TITLE: SD Memory Card Push-Push W/Connector 74273_DWG M10002119 16/04/09DATE:SIZESCALE: NTS U.O.M.: mm SHEET: 2 OF 3DWG NO. ELECTRONIC FILE REV A 16/04/09 A DATE:30/04/09UNLESS OTHERWISESPECIFIED,DIMENSIONS AREFOR REFERENCEPURPOSES ONLY. Dimensions : Millimetres  PART NO.ECN # REV- A REVISIONS DESCRIPTION  DRAWN DATE DATE DATECHECKD APPRVDVeena  16/04/09 16/04/09 30/04/09 Suresh Farnell RELEASED SDBMF-00915B0T2  This data sheet and its contents (the Information )belong to the Premier Farnell Group(the Group )or are licensed to it. No licence is granted for the use of it other than forinformation purposes in connection with the products to which it relates. No licenceof any intellectual property rights is granted. The Information is subject to change with-out notice and replaces all data sheets previously supplied. The Information supplied isbelieved to be accurate but the Group assumes no responsibility for its accuracy orcompleteness, any error in or omission from it or for any use made of it. Users of thisdata sheet should check for themselves the Information and the suitability of the prod-ucts for their purpose and not make any assumptions based on information included oromitted. Liability for loss or damage resulting from any reliance on the Information oruse of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)is excluded. This will not operate to limitor restrict the Group's liability for death or personal injury resulting from its negligence.SPC MULTICOMP is the registered trademark of the Group. ©Premier Farnell plc 2009.  TOLERANCES: DRAWN BY:VeenaSureshFarnellCHECKED BY:APPROVED BY:DATE: DRAWING TITLE: SD Memory Card Push-Push W/Connector 74273_DWG M10002119 16/04/09DATE:SIZESCALE: NTS U.O.M.: mm SHEET: 3 OF 3DWG NO. ELECTRONIC FILE REV A 16/04/09 A DATE:30/04/09UNLESS OTHERWISESPECIFIED,DIMENSIONS AREFOR REFERENCEPURPOSES ONLY. SD Card PIN Assignment PINName 1CD/DAT32CMD/D13VSS14VDD5CLK/SCLK6VSS27DAT08DAT19DAT2 Part Number Table DescriptionPart Number  Card, SD, Push/PushSDBMF-00915B0T2 0 Package Type T2 Plating Type - Contact Area Plating: 15 = 15 µ Inches Gold Plating. Package Type: 0 = Tray. Plating Type : T= Lead Free. Part Number Explanation:SDBMF00915 Contact Area Plating B http://www.farnell.comhttp://www.newark.comhttp://www.cpc.co.uk 
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks