Documents

sp4sample

Categories
Published
of 6
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Description
C.E.
Transcript
  An ACI Manual Formwork for Concrete 8 th  EditionSP-4 (14)  viii CHAPTERS 1: INTRODUCTION2: GENERAL OBJECTIVES IN FORMWORK BUILDING3: OVERALL PLANNING4: MATERIALS, ACCESSORIES, AND PROPRIETARY PRODUCTS5: LOADS AND PRESSURES6: SHORING AND FLOOR LOADS IN MULTI-STORY STRUCTURES7: DESIGN OF SLAB, WALL, BEAM, AND COLUMN FORMS8: DESIGN OF FORM SHORES AND BRACING9: DESIGN TABLES10: FORMWORK DRAWINGS11: BUILDING AND ERECTING THE FORMWORK 12: USING THE FORMS13: FORMED CONCRETE SURFACE QUALITY 14: FORMWORK FOR ARCHITECTURAL CONCRETE15: BRIDGE FORMWORK 16: MASS CONCRETE FORMWORK 17: TUNNEL AND SHAFT FORMWORK 18: SPECIAL TECHNIQUES IN CONCRETE CONSTRUCTION APPENDIX A—REFERENCED STANDARDS AND REPORTS APPENDIX B—NOTATION APPENDIX C—GLOSSARY  APPENDIX D—CONVERSIONS APPENDIX E—ACI 347R-14 GUIDE TO FORMWORK FOR CONCRETE APPENDIX F—ACI 318-11 CODE AND COMMENTARY PROVISIONS RELATED TO FORMWORK  APPENDIX G—OSHA REGULATIONS FOR FORMWORK AND SHORING APPENDIX H—PROBLEMSINDEX  1-1 1: INTRODUCTION Formwork development has paralleled the growth of concrete construction from its earliest uses through its many applications today. As concrete has been used for increas-ingly complex and significant structural and architectural tasks, formwork engineers and contractors have had to keep pace. Projects involving rapid construction schedules create challenges for the form designer and for the control of field forming operations.  The increasing use of concrete as an architectural medium presents the form builder with several challenges, ranging from the selection of appropriate sheathing materials to the maintenance of rigid tolerances.Sawn lumber, manufactured wood products, plywood, steel, aluminum, reinforced polymers, and other materials are widely used as formwork components. In addition, new and specialized accessories are frequently introduced by manufacturers. Form designers, builders, and manufacturers must keep abreast of advancing technology in other material fields to develop and implement the creative and innovative solutions required to main-tain both quality and economy.In the early days of the concrete industry, formwork was frequently built in place, used once, wrecked (or stripped), and discarded. Because of high labor costs in the United States and many other countries, the trend over the last several decades has been toward increased prefabrication, assembly in large units, erection by mechanical means (such as “flying” forms into place by crane), and reuse of the forms. These developments are in harmony with the increased mechanization often found in other fields and the desired use of sustainable systems. Consequently, the forming system selection is often a primary factor in locating cranes and in allocating site space for storage and fabrication.Not all of the important ideas are new, however. As early as 1908, members of the American Concrete Institute (then called the National Association of Cement Users) were debating the relative merits of wood and steel formwork at their annual convention.  The discussion followed a presentation proclaiming the advantages of a modular metal panel forming system. 1.1  It could be adapted for most any project, had its own connecting hardware, and was good for extensive reuse. By 1910, steel forms for paving were being (Photo courtesy Morley Builders)  15-8 CHAPTER 15 Pier cap and strut forms may be made as part of the shaft form or may be supported by shoring up from the ground with shoring frames or timber posts. They can also be supported on adjustable single-post shores for low elevations, or on steel beams attached to inserts or to large through-bolts placed in sleeves cast into a previous lift of pier concrete. For light beam caps on circular pier shafts, friction collars (Fig. 15.17) can be used to carry all or part of the cap formwork. 15.3 Superstructures Bridge superstructures include girders, a deck or roadway, curbs, sidewalks, and railings or parapets. Concrete bridge decks may be simple slabs for short spans or slab and girder construction for longer spans. They may be entirely cast-in-place, entirely precast, or a combination of cast-in-place slab with steel or precast concrete supporting girders. Many of the forming problems and techniques are similar to those for other slab work, the major differ-ence being the problem of support for formwork when spans are at great height, over water, or above unsatisfactory earth support. For special considerations and recommendations, refer to ACI 345R-11, “Guide for Concrete Highway Bridge Deck Construction,” and ACI 345.2R-13, “Guide for Widening Highway Bridges.” The use of mortar-tight deck and superstructure forms provides a smooth unblemished appear-ance that will   enhance public confidence in the soundness of the structure. 15.3.1 Monolithic—Simple Slab, Beam, and Girder  Bridges with short spans between supports (less than 25 ft) may be built as simple slab decks. Because these simple slab bridges are sometimes designed with the expecta-tion that the curbs will supply part of the bending resistance, the curbs may be cast integrally with the deck slab. Formwork for a slab deck is like that for any other slab; sheathing of metal, wood, plywood, or other material is supported on joists and stringers. Edge forms are equal in height to the curbing and are braced externally from  joists extending beyond the deck width.  The form is supported from below by any one of the various types of shoring, or on heavy horizontal members supported on the piers. On projects where there are many identical short spans, large one-piece forms have been used for an entire span, then lowered to barges and floated to the next position for reuse. Fig. 15.15: External ties and full-span wales used to avoid internal ties (Photo courtesy MEVA Formwork Systems) Fig. 15.16: Formwork for a hammerhead pier cap supported on brackets attached with through bolts (Photo courtesy EFCO Corp.)
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks